By rank
By rank
By vessel type
On the Map
Maritime news
For seamen
For companies
Search for current vacancies:
Show filters
Search resumes for seafarers:common basemy base
Home Online tests CES All types of vessels Deck Support Test about Basic Terminology on the vessel (CES v6.0)
Online testing: Test about Basic Terminology on the vessel (CES v6.0)
1
Select the test mode:
Education
Online test
Description
Reviews 1
Question 1 from 35
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
What is the normal name of the waterproof suit shown in the picture?
Wet suit.
Dry suit.
Life suit.
Immersion suit.
What is the daytime signal to be shown when the vessel is at anchor?
Two black balls where they can best be seen.
A black ball forward where it can best be seen.
The national flag flying from the fore most.
A black diamond forward where it can best be seen.
In the diagram, which letter is indicating the “bitts” which would probably be used by the mooring the ship?
The bits for the Forward Spring is indicated by B, in the figure.
The bits for the Forward Spring is indicated by A, in the figure.
The bits for the Forward Spring is indicated by D, in the figure.
The bits for the Forward Spring is indicated by C, in the figure.
On a vessel, where is the “boat deck” located?
It is the deck of a life boat giving access to un-hook the boat.
It is the name of the main deck of the ship or boat.
It is on the side of the accommodation from which persons embark into the lifeboats.
It is the lowest deck on the accommodation of a vessel where access is gained from a boat alongside.
How would you alert others on board if you saw a person falling overboard?
If I saw a person falling overboard I would inform the Bosun.
If I saw a person falling overboard I would run to the Bridge.
If I saw a person falling overboard I would shout once “Man overboard”.
If I saw a person falling overboard I would shout repeatedly “Man overboard”.
What is understood by the term “the Lee Side”?
It is the side opposite the wind.
It is the side with the wind on it.
It is the port side of the vessel.
It is the starboard side of the vessel.
Why could dirty and oily areas of the deck be dangerous?
They show the ship is not efficient.
They do not look good to the customers.
They may cause people to slip over and hurt themselves.
They are areas which should be cleaned up.
What do you understand by “Bitter end”?
Bitter end means: a foul taste at the end of a meal.
Bitter end means: to the very last moment.
Bitter end means: the toggled end of a lifeboat painter.
Bitter end means: the end link of an anchor cable that is secured within the chain locker.
During an anchoring operation, what does the bridge team mean when they ask “How is the chain leading”?
The bridge would like to know the direction of the anchor cable from the hawse pipe.
The Master is asking the Chief Officer whether the vessel is dragging anchor.
I don’t know.
The Master is asking the Chief Officer whether the ship needs to be moved forward and take the weight off the anchor cable.
What do you call the wide rung on a pilot ladder that prevents the ladder from twisting?
The wide rung on a pilot ladder that prevents it from twisting is called a “Spreader”.
The wide rung on a pilot ladder that prevents it from twisting is called a “Long rung”
The wide rung on a pilot ladder that prevents it from twisting is called a “Wide step”
The wide rung on a pilot ladder that prevents it from twisting is called a “Ani-twist rung”
On the diagram, what is the area at the forward end of the vessel shown by the letter “A”? It is normally raised by one deck above the main deck.
Fo’csle or Forecastle.
Forward bridge.
Crows nest.
Poop.
Where is the “PORT QUARTER”, in the figure?
The Port quarter is A in the figure.
The Port quarter is A in the figure.
The Port quarter is D in the figure.
The Port quarter is B in the figure.
What is name of the machine shown, used to heave on the ropes during mooring and unmooring?
Winch.
Capstan.
Crane.
Windlass.
Which is the “CAPSTAN” in the figure?
The Capstan is indicated by A in the figure.
The Capstan is indicated by D in the figure.
The Capstan is indicated by C in the figure.
The Capstan is indicated by B in the figure.
In the diagram, which letter is indicating the position “MIDSHIPS”?
Midships is indicated by D in the figure.
Midships is indicated by C in the figure.
Midships is indicated by B in the figure.
Midships is indicated by A in the figure.
When keeping a lookout, what would be the correct understanding of the question “What is the aspect of the other ship”?
The question wants to know what type of ship has been sighted.
The question is requesting some indication of what lights or part of the vessel is seen.
The question is requesting some idea of how far away the other ship is from your own ship.
The question is requesting where on the horizon the other ship was sighted.
What is understood by the term “take the helm”?
Take over heaving of a rope.
Take a message to another officer.
Take over the steering of the ship.
Change the place where the lookout is standing.
Would there ever be the need for two lookouts on the Bridge watch?
No, one lookout is sufficient even in fog.
Never necessary.
Yes, possibly whne there is dense fog and heavy traffic.
Every night there should be two lookouts, one on each bridge wing.
If the order is given to a mooring deck to “make fast”, what would happen?
Make fast means to set very quickly.
Mooring ropes are transferred from a winch drum to the bitts.
Make fast means to apply a lashing to a coiled mooring rope.
Mooring ropes are transferred from a storage drum to a winch to start heaving.
What could the wheelman be asked to do, to help in the preparations to leave the berth and go to sea?
Test the steering by putting the wheel hard over both ways.
Standby in the mess room until called to the bridge.
Help the forward team let go the ropes.
Help the after team let go the ropes.
What is a ship’s “Gangway”?
I don’t know.
A Gangway is an interval of time between a change of working gangs, on board.
A Gangway is a portable means of access between the ship and the shore.
A Gangway is the means of access into the cargo holds.
What is meant by the term “bunkers”?
It means fuel oil used in the ship’s engine(s).
It is a measure of the quantity of oil; cargo loaded.
It refers to the storing of lubricating oil.
It means the number of available bunk spaces available on the vessel.
Where is the “FORECASTLE” in the figure?
The Forecastle is indicated by D.
The Forecastle is indicated by B.
The Forecastle is indicated by A.
The Forecastle is indicated by C.
In the diagram, which letter is pointing to the area of the ship known as the “STERN”?
The Stern area is indicated by B.
The Stern area is indicated by D.
The Stern area is indicated by C.
The Stern area is indicated by A.
What is the normal term used for the regular training of how to launch the lifeboat?
Lifeboat drill.
Lifeboat practice.
Lifeboat launching.
Lifeboat exercise.
What is the name of the PORTABLE walkway or access between ship and shore?
Bulwark.
Bridgeway.
Accommodation ladder.
Gangway.
What do you understand by: “Let go the port anchor”?
Open the port windlass brake.
Slacken the port anchor cable.
Put the port windlass brake in gear and lower the anchor.
Put the port windlass brake in gear.
Read the text in the diagram and answer this question: “What should be given to prospective seafarers”?
Survival and protective clothing.
Passport and visa.
Recommendations.
Approved training in survival techniques.
Where is “AFT” in the figure?
Aft is A.
Aft is D.
Aft is B.
Aft is C.
In the diagram, the amount of water under the keel is indicated by the letter “C”. Which bridge instrument would measure this value?
Arpa Radar.
Draught Indicator.
ECDIS.
Echo Sounder.
What does the word “pirates” mean?
Pirates are persons who attempt to board and take over a ship at sea.
Pirates are special cargo lashings on container ships.
Pirates are another word for helmsmen.
Pirates are official people who bord the ship while in port.
What is a mooring line used for?
A mooring line is a line that is passed through a block ashore.
A mooring line is a line thrown ashore when a vessel ties up.
A mooring line is a small diameter line attached to a large diameter rope.
A mooring line is a thick wire or synthetic rope used to moor the ship.
What is meant by the term “Single up” when a vessel is preparing to leave the jetty to which it was moored?
This term used to describe the process of letting go most of the moorings lines and just leaving sufficient lines to stay safely alongside.
This term used when there is only one single rope left out between the ship and the jetty, when leaving the berth.
I don’t know.
This term used when only one single tug is used to assist the ship in leaving the berth.
Where is the “BRIDGE” in the figure?
The Bridge is C.
The Bridge is A.
The Bridge is D.
The Bridge is B.
What do you understand by the term “Let Go” when applied to mooring and unmooring?
Let Go means to let seafarers go ashore.
Let Go means to cast off the mooring ropes and wires.
Let Go means to leave the ship.
Let Go means to slacken a mooring rope.
Добро пожаловать на нашу страницу, где вы можете пройти онлайн-тест CES (Crew Evaluation Test) на тему «Deck Support Basic Terminology» (основные термины палубной поддержки). Эта практика предназначена для морских специалистов, желающих улучшить свои знания с помощью электронного обучения и оценочных тренировок. Наши CES/CBT тесты разработаны на основе доказательных данных и опыта морских профессионалов и широко используются для оценки компетенций в различных областях.
Тесты CES компании Seagull, ранее известной как OTG, предназначены для оценки базовых знаний моряков и определения потребностей в профессиональной подготовке, соответствующей международным стандартам STCW.
На данной странице представлена версия 6.0.0 теста CES, ориентированная на палубный департамент на различных типах судов. Этот тест охватывает широкий спектр тем, включая управление кризисными ситуациями, интегрированные навигационные системы, управление балластными водами, обработку и укладку грузов, управление эксплуатацией судна, морскую инженерию, техническое обслуживание и ремонт, а также многие другие важные аспекты.
Тема «Deck Support Basic Terminology» охватывает основные термины и терминологию, используемые в морской сфере для описания различных аспектов судовой инфраструктуры, операций и систем. Этот тест позволит вам углубить свои знания в области базовой терминологии, такой как "борт", "корма", "мостик" и многие другие, которые являются фундаментальными для морских специалистов.
Only seamen can leave reviews. To leave a review, log in to the site with a seaman's account.
28.06.2024
good reviewer for seaferer
Autotranslation